Many people have learned from us, and many have tried duplicating us. however there is only one (1) Capital Water Softener. One of the original pioneers in water conditioning, Capital Water Softener has been building quality products since 1936.

Our motto is, "You never had it so soft!"

M water softeners are Capital Water Softener's No. 1 selling domestic water conditioning systems, There is good reason for this and that is the heart of this unique system. THE CAPITAL VALVE, Capital Water Softener has been using the Capital Valve since 1946. With product improvements since that time. Capital Water Softener is now producing one of the highest quality products available in the water conditioning industry today with a warranty to match.

M FULLY AUTOMATIC, METER INITIATED SAVES UP TO 50% IN SALT AND SAVES WATER TOO

VALVE FEATURES 3/4" solid brass nickel plated valve body for long life and durability Incorporated within is a two(2) piece high density poly liner assembly in which the stainless steel plunger with PVC and high density poly seals travel through to pilot the five flow cycles. Fully automatic or can be manually placed into regeneration simply by turning the service indicator on the timer clockwise. Heavy duty drive train for fast and smooth shifting of cycles. Available in either 1 lOv, 220v, 50 or 60 Hz.

M WATER CONDITIONERS

A. MINERAL TANK: Fiberglass Reinforced Pressure Vessel manufactured to operate at 150 PSI and 120°F.
B. DISTRIBUTOR SYSTEM: 3-side slotted for maximum service flow and minimal pressure drop.
C. UNDERBEDDING: Gravel Underbedding allows full usage of the mineral bed.
D. MINERAL: High Capacity Ion Exchange, uniform beads for maximum hardness removal and long life.
E. BRINE TANK: High Density Polyethylene Brine Tank with environmental stress crack properties and dust resistant cover.
F. SALT GRID: Salt Grid System minimizes the salt from bridging and improves the brine concentration to obtain full capacity with each and every regeneration.
G. FLOAT VALVE: Is a positive shut-off, as well as a salt dosage control.

M & CM SERIES TIMER

M & CM Series Timers are easy to adjust. Set the time of day and the gallons of water. The timer automatically monitors the system's needs and will only regenerate when necessary. Factory set to regenerate at 2:00 a.m.

METER GALLON RANGES

Standard range: 125 - 2,100 Gallons
Extended Range: 625 - 10,500 Gallons

MODEL 5600 METER

PIPE SIZE: 3/4" or 1" connections
FLOW ACCURACY: .25 - 17.0 ±5%

SPECIFICATIONS
Model M	Mineral Tank Inches	Brine Tank Inches	Salt Storage Lbs.	Shipping Weight Lbs. Single	M Meter Size
16	7x44	18x33	200	75	3/4"
24	8x44	18x33	200	85	3/4"
32	9x48	18x33	200	105	3/4"
48	10x54	18x33	170	140	3/4"
64	12x48	18x40	300	240	3/4"
96	14x65	24x41	525	295	3/4"

CAPACITY CHART
Model M	Gravel In.	Resin Cu. Ft.	Rated Capacity Low Salt Grains @ Lbs.	Rated Capacity Medium Salt Grains @ Lbs.	Rated Capacity High Salt Grains @ Lbs.	Flow Rate Cont.	PSI Drop	BKW GPM
16	4	.50	12,700 @ 3.0	14,100 @ 5.0	16,300 @ 8.0	5.6	15	1.3
24	4	.75	19,100 @ 4.5	21,200 @ 7.5	24,500 @ 12.0	6.5	15	1.7
32	4	1.0	25,400 @ 6.0	28,200 @ 10.0	32,600 @ 16.0	8.4	15	2.0
48	4	1.5	38,100 @ 9.0	42,300 @ 15.0	48,900 @ 24.0	7.8	15	2.5
64	4	2.0	50,800 @ 12.0	56,400 @ 20.0	65,200 @ 32.0	10.0	14	3.0
96	4	3.0	76,200 @ 18.0	84,600 @ 30.0	97,800 @ 48.0	10.0	12.5	5.0

M - Models Two (2) Tank System Meter Initiated

OPERATING CONDITIONS
1. Temperature not to exceed 100°F and not be subject to freezing.
2. Water pressure, minimum 20 PSI and maximum 120 PSI.
3. The drain line should not be smaller than 1/2" not to exceed 8 ft. in height or over 20 ft. in length.
4. The brine tank should not be placed more than 10 ft. away.
5. Always proveide a three (3) way by-pass system.

DIMENSIONS Model M A B C D 16 18 33 7 56 24 18 33 8 56 32 18 33 9 60 48 18 33 10 68 64 18 40 12 58 96 24 41 14 77